NX Testers Feature Summary and Specifications

Connections Continuity: 0.1-10 ohms: ±0.1 ohm
                10 ohms - 100 ohms: ±1%
                100 ohms - 500K ohms: ±1%
                500K ohms - 2M ohms: ±5%

Shorts: 1Kohm - 2Mohms (± 20%)
Components Diodes: Checks for proper orientation

Resistors: 0.1-10 ohms: ±0.1 ohm
              10 ohms - 100 ohms: ±1%
              100 ohms - 500K ohms:±1%
              500K ohms - 2M ohms: ±5%

Capacitors: 100pF to 500uF (±2% to 20% based on capacitor type, ±10pF)
                Contact Dynalab for exact specification per capacitor type
4-wire (Kelvin)Mode .005 ohms to 100 ohms: ±1%, ±.005 Ohm
Relay Testing Capable of active relay testing
Test Voltage Test voltage is automatically selected by the NX Tester. The maximum voltage is 14VDC
Test Current Test current is automatically selected by the NX Tester. The maximum current is 5mA DC
Test Speed 1 seconds per 1024 test points (continuity only)
3 seconds per 1024 test points (continuity and shorts)
Display Errors are displayed using connector names, wire names, and wire color on a 4-line x 20 character display.
Audible Tones Provides a variety of user programmable tones for error notification and special events.
Program Storage 3.3Mb of capacity with no file quantity limitation.
Control Port One control port accommodates the optional Control Port Module to control a single device. Optional Multiport Unit is available to allow control for up to 24 devices through a serial port.
Serial Ports Two RS-232 ports are standard, and two additional RS-232 ports are optionally available to connect to printer, bar code scanner, extended display, or multiport unit.
Test Point Interface 64 pin card edge connector
Input Power Uses external power supply rated for 100 – 240VAC, 50-60Hz, 30W max. Power supply provides 15VDC to the NX Tester.
Test Point Capacity NX Solo: 128 - 256 test points
NX Pro: 128 - 512 test points
NX Pro+: 128 - 32768 test points
Size (W x D x H) NX Solo 10.7” x 7.5” x 2.8” (27.2 cm x 19 cm x 7.1cm)
NX Pro: 10.7” x 7.5” x 4” (27.2cm x 19 cm x 9.7cm)
NX Expansion Unit: 9.5” x 6.4” x 6.3” (24.2cm x 16.3cm x 16 cm)
Weight NX Solo: 5.1 lbs (2.3 Kg)
NX Pro: 6.6 lbs (3 Kg)
NX Expansion Unit:8.0 lbs (3.6 Kg)
Operating Temperature 32– 122 degrees F (0– 50 degrees Celsius)
Warranty One year parts and labor
Certifications CE Certified